Straight Edge Shavers

Find Similar Products Like Straight Edge Shavers at Amazon

For first-time and comparatively new users of straight razors, learning how to shave with a cut-throat razor not only sounds daunting but is likewise the time when susceptibility to getting nicks, cuts and a large total of skin annoyance is at it is highest.

Many new straight razor shavers are put off rather early in their “career” and the razors are ofttimes consigned to the drawer or put back up for sale on an auction site.

Realising that learning how to shave with a straight razor is not an for the length of one night task is rather important, as with learning any new skill that involves a tool of a lot of kind, it requires patience, dexterity and of course a well-honed and shave-ready razor to finish the occupation properly.

Without these things, anybody shaving with a straight razor will most likely end up getting a sub-par shave, and this straight razor shaving guide must help you get off to a better start out next time you pick up your favourite badger brush, cream and straight razor and set off tackling your beard.

First and foremost, the sharpness of the razor is the most essential thing. Contrary to general belief, the sharper the razor is does not mean that you will end up getting more cuts when equated to using a dull razor.

When you use a blade with a less than perfective edge, the razor will snag to varying degrees on your beard, and this snagging if not controlled in the right manner will closely surely lead to nicks and cuts.

Inexperienced straight razor shavers ordinarily put this down to their own poor technique rather than the razor.

Learning how to shave with a sharp straight razor is the original point of call, and if you do not recognise how to restore the edge yourself, you will have to seek counsel from an experienced straight razor shaver who will put you in touch with a “honemeister”, a term oftentimes used on forums to describe someone that is very competent of restoring the sharpness on the edge of a straight razor.

Assuming at this stage you have a straight razor with a great shaving edge, you now need to strop the edge of the blade. To do this you will of course need a strop, which is a double-sided strip of leather and canvas used to run the blade backwards and forwards in two strokes. One forwards and one back, each motion is referred to as a “lap”.

As such you ought to lap your straight razor, 20 or 30 times on each side of the strop, starting on the canvas first, and then using the leather-faced side last of all.

Stropping is very crucial as this procedure restores the edge of the straight razor amongst shaves by removing the residue and polishing the minuscule teeth on the edge of the razor that can not be seen by the naked eye.

Learning a good stropping technique is important, as this will reward you with a great shave, meaning that you will have less skin annoyance and almost eliminate getting cuts or nicks.

The Straight Razor Shave

Start off with taking a regular shower to open the skin pores on your face, the more steam the better. Some straight razor shavers like to use galore hair conditioner or a pre-shaving product for the duration of a shower to help ex-foliate the skin and soften the beard prior to shaving.

Once you have showered, run hot water into your bathroom sink and strop your razor, have a face towel or two to hand to clean up any spills for the duration of your shave, and do not forget to take your time for the duration of the original few months of shaving so that you may observe your technique and improve them for the duration of each future shave.

Shaving creams and soaps are vitally necessary to getting a good quality shave with a straight razor. Do not under any circumstances use a established shaving foam or gel that you would regularly use with a disposable or safety razor. These provide little to no skin shelter when using a straight razor, and will make an even more outstanding mess for the duration of and after the shave.

The shaving cream is designed to provide the skin with nourishment and act as a barrier amidst the straight razors edge and the skin/You will be amazed at how differently respective shaving creams perform, smell, and have an effect on the skins aspect and feel when you have finished shaving.

The choice of shaving cream or soap that you use is a matter of personal preference, and there are in a literal sense hundreds to choose from. Using a good quality cream is highly recommended, and altho highly subjective, to start out using a shaving creams such as Musgo Real, Speick, Trumpers, Taylors, D.R. Harris and Crabtree Evelyn, you won’t go far wrong.

As you progression with straight razor shaving, you will distinguish what shaving creams and soaps suit you best.

With your shaving brush to hand, soak the brush in hot water (not boiling), and gently shake out the excess water in the sink. Then add a spot of shaving cream to the brush, more or less littler than a little marble, wet the face, and then tardily get started scrubbing your face with the brush, applying a moderate amount of pressure using a circular motion in both directions until the face and neck area have a somewhat consistent coating of shaving cream.

Refrain from adding too much water to the brush or face as you are lathering up, you may always add a spot more to give hope or courage to lathering if your brush is well-loaded with shaving cream. You will know if this is the case or not as the cream will feel thick as the brush is moved throughout the face.

Experiment with adding tiny amounts of water to the face once shaving cream has been applied until it feels right. Too much water will make the cream run thin, and not provide an effective barrier for your skin, and this will closely surely lead to skin irritation. You may always add a touch more shaving cream to your brush and begin over if this is the case.

Now that you are ready to shave, take your straight razor and pull the skin tight using your non-shaving hand, and commence with a downward shaving pass on your face. Unlike using a conventional safety razor, you will soon learn that the best straight razor shaves come from using skin pulling proficiencies that you will learn as you go.

The skin will have to always be tightened by your fingers or hand for the duration of each stroke with a straight razor. Shaving on slack skin will only result in snagging and cuts, so you will need to commence getting used to using your other hand to support tighten the skin.

The straight razor will have to be held at approximately 30 degrees to the face, perchance somewhat shallower. Higher degrees of cutting will again result in poor cutting results and possible cuts, so use your eyes as the razor moves for the duration of each stroke and maintain the rectify cutting angle.

During your introductory few shaves with a straight razor, do not forget that you do not have to finish the whole shave using the straight. You are not obliged to finish the whole shave for the duration of the primary stages of the learning process, and it is no disgrace to pick up a disposable to finish off little areas that you may have missed.

This will not only save you a great deal of feeling of annoyance at being hindered or criticized attempting to reach seemingly inaccessible areas, it will also principally reduce your prospects of getting a nick. Patience is the key.

Once you have finished your initial downward pass, you may want to undertake an upward pass to get a very close shave.

Splash off the remaining cream from your face with a heap of water and re-apply your shaving cream, using a lighter pressure with the shaving brush. Use a circular motion once again until the face and neck area have a good coating of shaving cream, soak and wipe the razor with a piece of kitchen towel, or an old flannel taking great care not to touch the edge of the razor and you are now ready to get started the second, upward pass.

Using the same proficiencies in the reverse direction, pulling the skin on the neck downwards with one hand, using a 30 degree angle, commence the upward strokes, gently and with consistent pressure until the neck area is done. Then pull the skin downwards from the lower chin area and work your way over the jawbone onto the cheeks.

At this stage you must now begin pulling the skin upwards on the cheek area and maintain the strokes with your straight razor until the cheeks are done.

Shaving with an upward stroke on the moustache and chin areas is something that a lot of straight razor shavers do, though it is commended that you will have to only begin doing this if you in truth need to, and only once you have become convinced in using the straight razor.

When you have finished both passes on your skin, clean your razor by running some cold water on the blade and using a kitchen towel to remove all moisture from the razor. You may pick the razor up and blow any excess water through the gap in the scales as well.

This will prevent any water from dripping down into the gaps where the pins and washers meet the blade which is where the majority of rust spots start out on a razor if it is poorly maintained.

Open the blade and place it on a towel someplace to grant it to arid out for 10-15 minutes.

Prior to storing the razor, you may add a tiny spot of solid homogeneous inorgani substance oil to the blade and rub it in gently using a arid piece of kitchen towel or cloth.

After the shave you will want to relieve the skin after it has been ex-foliated by the straight razor.

Like shaving creams, there are just as some selections when it comes to shaving balms and aftershaves, and for new straight razor users, try using types that comprise no alcohol and have skin-nourishing ingredients in them.

I will explain the respective merits of shaving creams, soaps, balms and aftershaves in future articles.

If you obtain any nicks or cuts for the duration of the course of the straight razor shave, put down the razor, clean the nicked area with a little water, and apply gently pressure with the styptic pencil directly on the cut. There will be a stinging sensation that will pass very quickly, and after a few moments the cut will stop bleeding permitting you to finish the rest of your shave.


Straight Edge Shavers

Straight Edge Shavers Image

Straight Edge Shavers

Straight Edge Shavers Pic

Straight Edge Shavers

Straight Edge Shavers Image

Straight Edge Shavers

Straight Edge Shavers Image

Straight Edge Shavers

Straight Edge Shavers Pic

Straight Edge Shavers

Straight Edge Shavers Image